What are the Features of Overhead Door - Model 511 Aluminum Sectional Door That Suits Maximum Light Infiltration or Visibility Requirement of Commercial Buildings

Many commercial buildings like firehouses, service stations, retail environments, professional facilities are looking for commercial doors that provide good light infiltration and high visibility requirement. Overhead Door commercial sectional doors  like the Overhead Door- Model 511 Aluminum Sectional Door that offers a variety of glazing materials, stile widths, finish options and track styles. This commercial sectional door in New Orleans LA emphasizes handsome style as well as durable practicality, providing low maintenance and long service life.  

The 511 Series doors are designed in sizes up to 16’2” wide and 16’1” high (4928 mm and 4902 mm). Featuring a narrow center stile width of 21/32” (17 mm), these doors are sleek, attractive and permit maximum visibility. An array of glazing choices, top- and bottom-rail widths, finishes, and special options customizes the 511 Series to satisfy nearly any project requirement. 

Standard Features at a Glance:

·         Panel thickness 1 3/4” (45 mm)

·         Maximum standard width 16’2” (6147 mm)

·         Maximum standard height 16’1” (4902 mm)

·         Material 6063-T6

·          aluminum

·         Standard finish 204R-1

·          clear anodized

·         Center stile width 21/32" (17 mm)

·         End stile width 2 3/4" (70 mm)

·         Top rail width 2 3/8" (60 mm)

·          or 3 3/4" (95 mm)

·         Top intermediate rail width 3/4" (19 mm)

·         Bottom intermediate rail width 5⁄8" (16 mm)

·         Bottom rail width 2 3/8" (60 mm) or

·          3 3/4" (95 mm) or

·          4 1/2" (114 mm)

·         Weatherseals Bottom, flexible

·          PVC

·         Standard springs 10,000 cycle

·         Track 2" (51 mm)

·         Mounting Angle

·         Operation Manual pull rope

·         Hinges and fixtures Galvanized steel

·         Lock Galvanized,

·          interior-mounted

·          single unitarbonate, wire glass, and insulated glass.

Options

·         Glazing options*: 1⁄8” (3 mm) DSB; 1⁄8” (3 mm) or 1⁄4” (6 mm) plexiglass; 1⁄8” (3 mm) or 1⁄4” (6 mm) tempered; 1⁄8” (3 mm) or 1⁄4” (6 mm) clear Lexan®

·          1⁄4” (6 mm) wire glass; 1⁄2” (12 mm) insulated glass

·         Electric operator or chain hoist

·         Bottom sensing edge

·         3” track

·         Bracket mounting (not available on full vertical door tracks)

·         Higher-cycle springs in 25k, 50k, 75k, 100k cycles

·         Exhaust ports

Old commercial doors are utilitarian and, well, drab. Overhead Door Company of New Orleans, a Division of DuraServ  has applied its door expertise to create stylish doors for commercial and industrial applications. It turns out that attractive styling can be carried over to the commercial market. Overhead Door of New Orleans and other manufacturers can build very large commercial doors incorporating aluminum or steel, glass, and special finishes

Commercial doors engineered with aluminum, glass and powder coatings create new esthetic possibilities for businesses and other organizations. The selection of stylish commercial doors is bound to grow over time as more buyers demand doors that work well and look good. Servicing all of Louisiana including New Orleans, Metairie, Slidell, Belle Chasse, and Kenner. With our fleet of fully stocked vehicles and the team of factory-trained service technicians, we work around the clock to keep your loading dock equipment operating safely and efficiently. Dial 504-822-0345. 

How Dock Seals & Shelters Work to Improve Loading Dock System in Northshore, LA

The motion of products that comes in and out of facilities is highly competitive around the globe. Special attention must be given to the loading dock area. A lot of factors must be considered when coordinating and choosing the right loading dock equipment. Most of the workplace nowadays is not safe and we must not tolerate such unsafe work practices. Planners must ensure that the loading dock area is not just efficient but also safe. You can minimize dangers and accidents by installing loading dock safety equipment. And two of the most important loading dock equipment is the dock seals and shelters. 

Dock Seals

Dock seals are made of foam pads wherein the trailer compresses into when it backs and comes to rest against the dock bumpers causes it to form a seal around three sides of the trailer. Generally, dock seals give a tight seal for a low price and can worn tear out easily at loading docks in which it receives heavy traffic. Docks can be used if there are minor differences in sizes and styles of trailers being served. 

Dock Shelters

Dock shelters are paddocks that close the perimeter of a trailer to create a seal. This is polished by applying pressure against sides of the trailer with fabric curtains fitted with fiberglass stays. Dock shelters can be fitted in larger dock door openings and services a wide variety of trailer heights and styles while being put through to less damage from daily wear and tear. They are also allowed to access loads on the trailer whether full and unobstructed for maximum loading and unloading efficiency. 

Each of them represents a huge hole in the wall of your facility. Stretched together, this loading dock equipment gives a big opportunity for bad things to enter your facility-think about dust, insects, rodents, weather disturbances such as rain, wind and good things such as heating and cooling energy to escape. 

Weather-related product loss and damage and contamination, employee comfort and safety, hygienic facility, neatness and cleanliness, air quality and maintenance of products are all concerns connected to protecting and controlling the environment at the loading dock. Any actions given by the company to seal up holes is one of the loading dock solutions. It makes sure that it can have an immediate positive effect. Effective dock sealing products from Overhead Door Company of New Orleans is offered and designed to be installed quickly. This is to ensure that docks are sealed up tight and your people, products and profits are protected. 

If you are looking for a dock seal and shelter to be put up on your facility, you may contact us on our phone number 504-822-0345 or visit our website at https://www.ohdno.com/contact/ or https://www.ohdno.com/service-request/. We also extend our products to service areas such as New Orleans, Metairie, Slidell, Belle Chasse, Kenner, Northshore, Hammond, Covington, Mandeville, Laplace, Houma, Thibodaux, River Region, Ponchatoula, Harvey, Marrero, Gretna, Destrehan, St. Rose, Reserve, and Abita.